| Property |
Description |
| AdapterAddress
|
Returns the IP
address associated with the specified network adapter |
| AdapterCount
|
Returns the number
of available local and remote network adapters |
| AtMark
|
A read-only
property that returns True if the next receive will return urgent
data |
| AutoResolve
|
Determines if host
names and addresses are automatically resolved |
| Backlog
|
Gets and sets the
number of client connections that may be queued by a listening
socket |
| Blocking
|
Gets and sets the
blocking state of the control |
| Broadcast
|
Determines if
datagrams should be broadcast over the network |
| ByteOrder
|
Gets and sets the
byte order in which integer data will be written to and read from
the socket |
| CertificateExpires
|
Return the date
and time that the server certificate expires |
| CertificateIssued
|
Return the date
and time that the server certificate was issued |
| CertificateIssuer
|
Returns
information about the organization that issued the server
certificate |
| CertificateName
|
Gets and sets the
location of the certificate name |
| CertificateStatus
|
Return the status
of the server certificate |
| CertificateStore
|
Gets and sets the
location of the certificate store |
| CertificateSubject
|
Returns
information about the organization that the server certificate was
issued to |
| CipherStrength
|
Return the length
of the key used by the encryption algorithm |
| Connected
|
Determine if the
control is connected to a remote host |
| ExternalAddress
|
Return the
external IP address assigned to the local system |
| Handle
|
Return the
descriptor for the current socket |
| HashStrength
|
Return the length
of the message digest that was selected |
| HostAddress
|
Gets and sets the
IP address of the remote host |
| HostAlias
|
Returns the
aliases defined for the current hostname |
| HostFile
|
Gets and sets the
name of an alternate host file |
| HostName
|
Gets and sets the
name of the remote host |
| InLine
|
Sets or returns if
urgent data is received in-line with non-urgent data |
| Interval
|
Gets and sets the
number of milliseconds between calls to the control's timer
event |
| IsBlocked
|
Determine if the
control is blocked performing an operation |
| IsClosed
|
Determine if the
connection has been closed by the remote host |
| IsReadable
|
Determine if data
can be read from the socket without blocking |
| IsWritable
|
Determine if data
can be written to the socket without blocking |
| KeepAlive
|
Set or return if
keep-alive packets are sent on a connected socket |
| LastError
|
Gets and sets the
last error that occurred on the control |
| LastErrorString
|
Return a
description of the last error that occurred |
| Linger
|
Gets and sets the
number of seconds to wait for the socket to close |
| Listening
|
Returns if the
socket is listening for connections |
| LocalAddress
|
Return the IP
address of the local host |
| LocalName
|
Return the name of
the local host |
| LocalPort
|
Gets and sets the
port number for a local listening socket |
| LocalService
|
Gets and sets the
name of a well-known local port |
| MaxDatagram
|
Return the maximum
size of a UDP datagram |
| MaxSockets
|
Return the maximum
number of sockets that can be created |
| NoDelay
|
Enable or disable
the Nagle algorithm |
| PeerAddress
|
Return the IP
address of the remote peer |
| PeerName
|
Return the name of
the remote peer |
| PeerPort
|
Return the port
number of the remote connection or datagram |
| PhysicalAddress
|
Return the MAC
address for the local host's Ethernet or Token Ring adapter |
| PortString
|
Return the local
host IP address and port number |
| Protocol
|
Gets and sets the
protocol that should be used to create the socket |
| RemotePort
|
Gets and sets the
port number for a remote connection |
| RemoteService
|
Gets and sets the
name of a well-known remote port |
| ReservedPort
|
Set or return if a
reserved local port number should be allocated |
| ReuseAddress
|
Set or return if
an address can be reused |
| Route
|
Set or return if
packets should be routed |
| Secure
|
Set or return if a
connection to the remote host is secure |
| SecureCipher
|
Return the
encryption algorithm used to establish a secure connection |
| SecureHash
|
Return the message
digest selected when establishing a secure connection |
| SecureKeyExchange
|
Return the key
exchange algorithm used to establish a secure connection |
| SecureProtocol
|
Gets and sets the
security protocol used to establish a secure connection |
| State
|
Return the current
state of the socket |
| ThrowError
|
Enable or disable
error handling by the container of the control |
| Timeout
|
Gets and sets the
amount of time until a blocking operation fails |
| Trace
|
Enable or disable
socket function level tracing |
| TraceFile
|
Specify the socket
function trace output file |
| TraceFlags
|
Gets and sets the
socket function tracing flags |
| Urgent
|
Send or receive
urgent data |
| Version
|
Return the current
version of the object |
| WinsockVendor
|
Returns the name
of the Windows Sockets software vendor |
| WinsockVersion
|
Returns the
version of the Windows Sockets library |