| Property |
Description |
| AreaCode
|
Gets and sets the
area code for the current phonebook entry |
| AutoConnect
|
Automatically
detect connections established by another process |
| AutoDial
|
Determine if
autodialing has been enabled on the local system |
| AutoDisconnect
|
Automatically
disconnect from the remote server when the control is unloaded |
| Available
|
Determine if the
Remote Access Service is available |
| Blocking
|
Gets and sets the
blocking state of the control |
| BytesIn
|
Returns the number
of bytes that have been received by the dial-up networking
device |
| BytesOut
|
Returns the number
of bytes that have been transmitted by the dial-up networking
device |
| Callback
|
Specifies that the
remote server should call the system back |
| CallbackNumber
|
Specifies the
telephone number for the remote server to call back on |
| Connected
|
Determine if the
control is connected to a remote host |
| Connection
|
Return the handle
for the specified dial-up networking session |
| Connections
|
Return the number
of active dial-up networking sessions |
| ConnectSpeed
|
Returns the line
speed for the current dial-up networking connection |
| CountryCode
|
Gets and sets the
country code for the current phonebook entry |
| CountryName
|
Gets and sets the
country name for the current phonebook entry |
| DefaultGateway
|
Set the default
route for IP packets through the dial-up adapter |
| DeviceCount
|
Returns the number
of dial-up networking devices available |
| DeviceEntry
|
Return the name of
the specified device entry |
| DeviceName
|
Gets and sets the
device name for the current dial-up networking connection |
| DeviceType
|
Gets and sets the
device type for the current dial-up networking connection |
| DynamicAddress
|
Configure the
current phonebook entry to use a dynamic IP address |
| DynamicNameServers
|
Configure the
current phonebook entry to use dynamic nameservers |
| FramingProtocol
|
Gets and sets the
framing protocol for the current phonebook entry |
| Handle
|
Gets and sets the
handle for the current dial-up networking connection |
| InternetAddress
|
Return the IP
address assigned to the current dial-up networking session |
| Interval
|
Gets and sets the
interval at which the connection is monitored |
| IpHeaderCompression
|
Configure the
current phonebook entry to enable IP header compression |
| LastError
|
Gets and sets the
last error that occurred on the control |
| LastErrorString
|
Return a
description of the last error that occurred |
| LcpExtensions
|
Configure the
current phonebook entry to use PPP LCP extensions |
| LocalNumber
|
Gets and sets the
local phone number specified in the phonebook entry |
| ModemLights
|
Enable or disable
the dial-up networking system tray icon |
| ModemSpeaker
|
Enable or disable
the modem speaker |
| NameServer
|
Gets and sets the
IP addresses of the nameservers assigned to the current phonebook
entry |
| NetworkLogon
|
Configure the
current phonebook entry to logon to the network |
| NetworkProtocol
|
Gets and sets the
network protocol for the current phonebook entry |
| Password
|
The password
required to establish a connection with the remote server |
| PhoneBook
|
Sets the file name
of the Remote Access phone book to use |
| PhoneBookEntries
|
Return the number
of entries in the current phone book |
| PhoneBookEntry
|
Return the name
for the specified phone book entry |
| PhoneEntry
|
Specify the phone
book entry to use to establish a connection with a remote
server |
| PhoneNumber
|
Specifies the
telephone number of the remote server |
| RequireEncryption
|
Configure the
current phonebook entry to require secure authentication |
| ScriptFile
|
Gets and sets the
name of the script file for the current phonebook entry |
| ServerAddress
|
Return the IP
address of the dial-up networking server |
| SoftwareCompression
|
Configure the
current phonebook entry to negotiate software compression |
| State
|
Return the current
state of the control |
| Terminal
|
Determine if a
terminal window is displayed during the connection process |
| ThrowError
|
Enable or disable
error handling by the container of the control |
| Timeout
|
Gets and sets the
number of seconds until a connection attempt fails |
| UserDomain
|
Specifies the NT
domain on which user authentication is to occur |
| UserName
|
Set the user name
that is required to establish a connection with the remote
server |
| UserPhoneBook
|
Returns the name
of the default user phonebook |
| Version
|
Return the current
version of the object |